cjmcu-2232hl

cjmcu-2232hl USB Diy Kit Electronic PCB Board Module

cjmcu-2232hl USB Diy Kit

  • Module size: 42mm * 37mm Typical Applications Single chip USB to dual channel UART (RS232, RS422 or RS485). Single chip USB to dual channel FIFO. Single chip USB to dual channel JTAG.
  • Single chip USB to dual channel SPI. Single chip USB to dual channel I2C.
  • Single chip USB to dual channel Bit-Bang. Single chip USB to dual combination of any of above interfaces. Single chip USB to Fast Serial Optic Interface. Single chip USB to CPU target interface (as memory), double and independent.
  • This allows the user to communicate with the USB interface via a standard PC serial emulation port (for example TTY).
  • Another FTDI USB driver, the D2XX driver, can also be used with application software to directly access the FT2232H through a DLL.
cjmcu-2232hl best
cjmcu-2232hl best

Key Hardware Features

The cjmcu-2232hl is FTDI’s 5th generation of USB devices. The FT2232H is a USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces.

Building on the innovative features of the FT2232, the FT2232H has two multi-protocol synchronous serial engines (MPSSEs) which allow for communication using JTAG, I2C and SPI on two channels simultaneously.
The FT2232H is available in Pb-free (RoHS compliant) 64-pin LQFP/QFN and 56-pin QVFN packages.

Single chip USB to dual serial / parallel ports with a variety of configurations.
Entire USB protocol handled on the chip. No USB specific firmware programming required.
USB 2.0 High Speed (480Mbits/second) and Full Speed (12Mbits/second) compatible.

cjmcu-2232hl Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.
Dual independent UART or FIFO ports configurable using MPSSEs.
Independent Baud rate generators.
RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud. (RS232 Data Rate limited by external level shifter).

Details Usb cjmcu-2232hl
Details Usb cjmcu-2232hl

USB to parallel FIFO transfer data rate up to 10Mbyte/sec.
Single channel synchronous FIFO mode for transfers up to 40 Mbytes/sec.
CPU-style FIFO interface mode simplifies CPU interface design.
MCU host bus emulation mode configuration option.
Fast Opto-Isolated serial interface option.
FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
Adjustable receive buffer timeout.

Option for transmit and receive LED drive signals on each channel.
Enhanced bit-bang Mode interface option with RD# and WR# strobes.
FT245B-style FIFO interface option with bidirectional data bus and simple 4 wire handshake interface.
Highly integrated design includes +1.8V LDO regulator for VCORE, integrated POR function and on chip clock multiplier PLL (12MHz – 480MHz).

Asynchronous serial UART interface option with full hardware handshaking and modem interface signals.
Fully assisted hardware or X-On / X-Off software handshaking.
UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.
Auto-transmit enable control for RS485 serial applications using TXDEN pin.

Usb cjmcu-2232hl
Usb cjmcu-2232hl

Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface.
Configurable I/O drive strength (4,8,12 or 16mA) and slew rate.
Low operating and USB suspend current.
Supports bus powered, self powered and high-power bus powered USB configurations.

UHCI/OHCI/EHCI host controller compatible.
USB Bulk data transfer mode (512 byte packets in Hi-Speed mode).
+1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).
Extended -40°C to 85°C industrial operating temperature range.
Compact 64-LD Lead Free LQFP/LQFN package and 56-LD VQFN packages.
+3.3V single supply operating voltage range.

Application Areas

Single chip USB to dual channel UART (RS232, RS422 or RS485).
Single chip USB to dual channel FIFO.
Single chip USB to dual channel JTAG.
Single chip USB to dual channel SPI.
Single chip USB to dual channel I2C.
Single chip USB to dual channel Bit-Bang.
Single chip USB to dual combination of any of above interfaces.
Single chip USB to Fast Serial Optic Interface.
Single chip USB to CPU target interface (as memory), double and independent.
Single chip USB to Host Bus Emulation (as CPU).

cjmcu-2232hlHOME PAGE

Leave a Reply