gh27g SOT

gh27g SOT223 IC AZ1117EH-3.3TRG1 AZ1117EH New

Details gh27g SOT223 IC

Origin: CN(Origin) gh27g. Condition: New. Type: Voltage Regulator. Model Number: AZ1117EH-3.3TRG1. Application: Computer. Package: SOT223

gh27g SOT best
gh27g SOT best

Choose the part number, manufacturer and package from the below chart carefully and then add to cart to proceed to checkout.

GH27G, manufactured by Jameco and distributed by Worldway Electronics. It’s category belong to Electronic Components ICs.
It is applied to many fields, like Communications equipment Broadband fixed line access Industrial Aerospace & defense Personal electronics PC & notebooks .

Chip computer review

The CHIP first appeared on a Kickstarter campaign which was launched on May 7, 2015. Their goal was to raise $50,000 to build the boards. The campaign ended with over $2 million raised.

To give you an idea of what the CHIP has to offer, I created the table below to compare the capabilities of the Raspberry Pi 2 (which was released before Kickstarter campaign) and the most recent Raspberry Pi 3.

As you can tell by looking at this chart, that the CHIP had slightly more processing power than the Pi 2. It also had half the RAM of both. With that in mind, let me tell you about my experiences.

I had heard about the CHIP gh27g when it first came out but didn’t take part in the Kickstarter campaign. As months went by, I read articles about shipments being delayed and backers stuck waiting for their devices to arrive. Because of that, I kept the CHIP in my mental wishlist but didn’t take the plunge. Then a year later in July of 2016, I took another look at it and eventually purchased one. Frustratingly, the delays were not over. My CHIP didn’t arrive until the middle of November.

More gh27g SOT
More gh27g SOT

Before powered up the CHIP for the first time, it was recommended that I update it first. Since the CHIP has built-in storage (unlike the PIs which use MicroSD cards), I had to plug it into my computer to flash it. I used my Windows 7 desktop to do that job because Chrome was already installed. However, it took quite a bit of fumbling to get the flashing software to recognize the device.

After about ten attempts and a couple browser restarts, I successfully flash the CHIP to the latest OS. Since I also purchased the VGA adapter, I was able to plug it into my existing monitor. The CHIP only has one USB port, so I used a Logitech wireless mouse with a Unifying dongle and a Bluetooth keyboard. The mouse worked right away, which made me very happy. I had to do some setup to get the keyboard working, but that is normal.

The CHIP gh27g new runs Debian and version 4.4 of the Linux kernel. If you plug it into a monitor, you are using a XFCE desktop. When I ran screenfetch, it said that I was using a little over 200 MB of RAM out of 500. That doesn’t seem like much room to open multiple applications.

gh27g SOT modern
gh27g SOT modern

I tried to run IceWeasel (Debian’s rebranding of Firefox). It ran, but very slow especially with more than two tabs open. The same was true for LibreOffice.

The team from Next Thing Co included a nice little application to install new software. Available packages were listed by category and some were listed by desktop environment, like MATE and KDE. I was surprised to see the second one listed on a system that only has 500 MB of RAM.

The Chip as a Server

After being disappointed with the CHIP’s performance as a desktop, I decided to run it as a server. Before redoing so, I reflashed it for headless use (which took several tries to work). The main reason I reflashed it was to see if it freed up any extra space. It didn’t. I guess a desktop environment does not take up as much space as I thought.

Next, I tried using a serial connection via a USB cable. Unfortunately, the documentation on how to do this was very short and confusing. Even people I asked on the forum said it was confusing. Thankfully, they were very helpful.

Once I logged into the CHIP, I ran screenfetch again. This time it was only using 62MB of RAM. I tried to install NextCloud to how it ran as a personal cloud. but I was unable to get it to run. So, I decided to install Apache and use it as a local server to practice web development on. It might be slow for WordPress and other CMSs, but it should work pretty well.

gh27g SOD price
gh27g SOD price

Before proceeding, keep in mind this is the opinion of one guy, who’s more comfortable with Manjaro (Arch) than Debian. Also, I’m not exactly as sysadmin level user.

Not surprisingly, the CHIP did not have a great desktop experience. It was slow, but it was stable. It didn’t crash once, as you would expect from Debian. Getting the CHIP flasher to work was a major headache, but they recently updated and improved it so maybe that problem is fixed already. The documentation was confusing and hard to follow. I wish they had more distro or even OS choices. I’d love to try FreeBSD on this thing.

The CHIP worked a lot better as a server that you could just plug in and forget. In this use case, 500 MB of RAM is not an issue. It had both wifi and Bluetooth, which can’t be said for a bunch of ARM boards. There is a great community built up around this board

gh27g SOT ICHOME PAGE

Leave a Reply