Led earrings free shipping
Led earrings free shipping new 100% brand new and high quality
Suitable for Nightclubs ,dance hall and parties
Bling and colorful LED light of the studs makes you eye-catching and cool
If you feel a little more shy You can even turn the LED\’s off by pulling out the post slightly
Main Material: Stainless steel earring with Cubic Zirconia stone(Including Nickel)
Top Size: Approx. 7mm
Total Length: Approx. 2cm
Battery: LR521 AG0 button battery(replaceable)
Light Color: Red,Yellow,Green,Blue,Purple,White,Pink,Multicolor,Orange
DIY LED Earrings
LED Earrings are powered by small batteries in metallic casing containing tiny LED diodes. The diodes pulsate based on settings you choose after you turn on the earrings. Tiny and compact, LED earrings are easy to use and very portable.
They are very light and don’t weigh down your ears—you would forget you’re wearing them except for the smiles and oohs and ahhs and high fives you’d get from your fellow ravers, dancers, and concertgoers. Since LED Earrings are so compact, there’re no long nasty-looking wires to worry about. Just snap them on your ears and start partying away.
Before Led earrings free shipping attending a fancy art event, my friend asked me to create her some cool light up earrings. I wanted to design something that would be light weight, and be wearable without the battery for everyday use. I started with a small 3v coin cell battery and build my design from there. This project is prefect for someone just starting out, as it introduces your to LEDs and require minimal solder.
Disclaimer: Depending on the colors of your LED the voltage may vary, and a 3V battery may be too much voltage. My red LEDs where rated at 2V, but I chose not to use resistors as I wanted to keep the simplity of the design. Setting up your LED like this can cause the battery to wear out faster or the LEDs to burn out. Since these earrings will only be worn for speical events anyways, I found the risk was worth ascetic value and simplicity of this project and I havn’t had any problems.
Line up your LEDs and slide the battery between the legs of the LE.D Make sure that all the positive leds of the LED are on the same side, and on the positvive side your battery. You can tell if you have it correctly buy whether the LEDS are all lighting up or not.
Once you have them how you like them,I taped it together to hold it in place and marked the positive and negative sides with a marker to make soldering them togther eaiser.
Starting with the positive side, solder the wire as you can onto the top of the LED connecting them all togther. Make sure none of the LED legs cross over ecother. Trim the excess.
On Led earrings free shipping negative side do the same thing, this time placing the conductive wire about 3/4 of the way up and solder it into place. Trim the access
This V shape we have just created will hold the battery in place.Test it out by slipping the battery in to make sure everything it working and the LEDs light up. Bend the LED legs if needed to hold the battery more firmly.
Attach the earring hook by placing the other jump ring into the solder one, and then attaching the earring hook to that. Slip the battery in and your earring is ready! Complete this proccess a second time to create two matching earrings.
Take your new earrings out on the town! You can also removed the battery and just have simple wire earring. I think they cool both ways. Feel free to experiment with different LED colors and formations to create your very own design.
Led earrings free shipping – HOME PAGE